This is our newest addition to the FatFoxx TFI RELOCATION kits. If you look at the photo you will notice that this looks like a factory TFI Module, but it is not. The entire inner circuitry has been gutted so we could make this a passive design. You mount our gutted module on the distributor and mount your new module on the SIDE MOUNTED heat sink that we provide in the kit. If you also notice by the photo is that this is a full fin heat sink with a angle bracket for side mounting. The shield grounds through the back plate of the gutted module and is a full run through the PIP harness. DO NOT MODIFY THE PIP HARNESS OR GUTTED MODULE IN ANY WAY. We have tested everything before it leaves our facility. This TFI Relocation kit gives you that stock look for all the car show people that want their cars to look factory.
Side mounted high quality machined aluminum heat sink/ 3 color coded extension wires/ heat shrink and all stainless steel hardware/ 9’6″ PIP harness (twisted shielded) with gutted TFI module for that stock look/A VERY DETAILED SET OF ILLUSTRATED INSTRUCTIONS/ Dielectric grease/ ARCTIC SILVER 5.